View VHS40_7750869.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

step1 step2 combination with a (modular style) f.r.l. is possible. ac20-a ac25-a ac30-a ac40-a ac50 vhs20 vhs30 VHS40 vhs50 zero blow-by of the air during switching of the handle energy saving double action with the indicator window safety measure with locking holes ? vhs20 60 % lighter weight max. 45 % up sonic conductance c[dm 3 /sbar] max. cat.es13-10a single action series vhs20/30/40/50 double action series vhs2510 /3510 /4510 /5510 conforming to osha standard pressure relief 3 port valve with locking holes new new rohs www.datasheet.net/ datasheet pdf - http://www..co.kr/
material: resin (handle, bonnet) with the indicator window with locking holes with bracket built-in silencer (exh port) double action lightweight options made to order (-x1) variations safety measure osha standard (occupational safety and health administration department of labor) for safety control, osha rule requires energy sources for certain equipment be turned off or disconnected and that the device either be locked or labelled with a warning tag. : supply sup : exhaust exh bracket step1 push down the handle turn the handle step2 can prevent accidents caused by inadvertent air supply problems. red body is available. vhs20 (aluminum body is standard): 190 g 76 g vhs20-a vhs20-b single action series vhs20/30/40/50 double action series vhs2510 /3510 /4510 /5510 handle: flame resistant pbt (equivalent to ul-94,v-0) bonnet: flame resistant pbt (equivalent to ul-94,v-0) built-in silencer silencer can be mounted afterwards body: aluminum aluminum handle and bonnet type is available. 1/8 1/4 3/8 1/2 3/4 1 vhs2510 vhs3510 vhs4510 vhs5510 double action vhs20 vhs30 VHS40 vhs50 single action element element cover resin handle and bonnet is standard. 60 % lighter space saving body weight maximum port size 1/8, 1/4, and 3/8 are now available for double action type. the supply/exhaust status of the air flow can be verified at a glance in the indicator window. when in the exhaust position, the valve may be padlock secured. prevents accidental start-ups while personnel are cleaning or servicing equipment. push the handle and then turn, 2-step action prevents malfunction. features 1 features 2 conforming to osha standard pressure relief 3 port valve with locking holes www.datasheet.net/ datasheet pdf - http://www..co.kr/
material: resin (handle, bonnet) with the indicator window with locking holes with bracket built-in silencer (exh port) double action lightweight options made to order (-x1) variations safety measure osha standard (occupational safety and health administration department of labor) for safety control, osha rule requires energy sources for certain equipment be turned off or disconnected and that the device either be locked or labelled with a warning tag. : supply sup : exhaust exh bracket step1 push down the handle turn the handle step2 can prevent accidents caused by inadvertent air supply problems. red body is available. vhs20 (aluminum body is standard): 190 g 76 g vhs20-a vhs20-b single action series vhs20/30/40/50 double action series vhs2510 /3510 /4510 /5510 handle: flame resistant pbt (equivalent to ul-94,v-0) bonnet: flame resistant pbt (equivalent to ul-94,v-0) built-in silencer silencer can be mounted afterwards body: aluminum aluminum handle and bonnet type is available. 1/8 1/4 3/8 1/2 3/4 1 vhs2510 vhs3510 vhs4510 vhs5510 double action vhs20 vhs30 VHS40 vhs50 single action element element cover resin handle and bonnet is standard. 60 % lighter space saving body weight maximum port size 1/8, 1/4, and 3/8 are now available for double action type. the supply/exhaust status of the air flow can be verified at a glance in the indicator window. when in the exhaust position, the valve may be padlock secured. prevents accidental start-ups while personnel are cleaning or servicing equipment. push the handle and then turn, 2-step action prevents malfunction. features 1 features 2 conforming to osha standard pressure relief 3 port valve with locking holes www.datasheet.net/ datasheet pdf - http://www..co.kr/
in out built-in silencer 3 spacer spacer with bracket conforming to osha standard pressure relief 3 port valve with locking holes (single action) series vhs20/30/40/50 how to order 04 a bs vhs 40 made to order x1 description body: red note) symbol semi-standard specifications nil r z note) description ? flow direction: right left psi as unit displayed on label symbol options nil b s description ? with bracket built-in silencer (exh port) symbol pressure relief 3 port valve body size 20 30 40 50 symbol thread type nil n f rc npt g note) only for the npt thread. under the new measurement law, products for overseas use only (si unit type for use in japan). note) refer to photo of x1 in feature 2 for the appearance. note) vhs50 can be connected to ac55 and ac60. a spacer or spacer with bracket is required if the valve is combined with modular f.r.l. please order it separately. vhs type can be ordered from how to order of modular f.r.l. combination. handle / bonnet material a b material flame resistant pbt aluminum symbol 01 02 03 04 06 10 symbol body size 20 ? ? ? ? 30 ? ? ? ? 40 ? ? 50 ? ? ? ? port size port size 1/8 1/4 3/8 1/2 3/4 1 pressure relief 3 port valve spacer with bracket part no. spacer part no. y200-a y300-a y400-a y500-a y600-a y200t-a y300t-a y400t-a y500t-a y600t-a applicable air preparation equipment ac20-a ac25-a, ac30-a ac40-a ac40-06-a ac50, ac55 note) , ac60 note) vhs20 vhs30 VHS40 VHS40-06 vhs50 single action 1 rohs www.datasheet.net/ datasheet pdf - http://www..co.kr/
exh q w y u t i r e in out 3 (exh) e w q u y t r 1 (in) 2 (out) cross section of exh port built-in silencer (option) !1 !2 !3 model vhs20 vhs30 VHS40 VHS40-06 vhs50 76 g 92 g 127 g 156 g 247 g 301 g 293 g 349 g 532 g 630 g air ?5 to 60c(no freezing) 1.5 mpa 0.1 to 1.0 mpa 90 handle: red body: white fluid ambient and fluid temperature proof pressure operating pressure range handle switching angle paint color (standard) weight model in, out exh port size inout outexh flow-rate characteristics c(dm 3 /sbar) b cv c(dm 3 /sbar) b cv 1/8 1/4 1/4 3/8 1/4 3/8 1/2 3/4 3/4 1 2.4 3.3 6.4 8.3 7.3 10.9 14.2 18.3 23.8 31.9 0.43 0.40 0.45 0.41 0.49 0.45 0.39 0.31 0.41 0.33 0.65 0.88 1.7 2.3 2.0 3.0 3.8 5.0 6.4 8.6 2.5 3.1 6.2 7.0 8.5 11.6 13.3 17.7 21.8 23.5 0.39 0.51 0.38 0.41 0.35 0.40 0.43 0.37 0.41 0.44 0.69 0.84 1.7 1.9 2.3 3.1 3.6 4.8 5.9 6.4 1/8 1/4 3/8 1/2 1/2 vhs20 vhs30 VHS40 VHS40-06 vhs50 component parts flow-rate characteristics standard specifications description vhs20 to 50-a vhs20 to 50-b material flame resistant pbt (ul-94 standard v-0 equivalent) flame resistant pbt (ul-94 standard v-0 equivalent) adc12 adc12 adc12 pom pbt h-nbr stainless steel pom note white white red ? ? ? ? ? body bonnet handle cam ring spool spool o-ring spool spring ferrule no. 1 2 3 4 5 6 7 8 ? the vhs series cannot be disassembled. parts cannot be shipped separately. note 1) bracket/1pc., mounting screw/2pcs. note 2) element !1, element o-ring !2, element cover !3 1pc. for each. specifications construction vhs20 to 50-b vhs20 to 50-a jis symbol osha standard (occupational safety and health administration department of labor) for safety control, osha rule requires energy sources for certain equipment be turned off or disconnected and that the device either be locked or labelled with a warning tag. 3 1 2 a (handle, bonnet: flame resistant pbt) b (handle, bonnet: aluminum) option part no. vhs20pw-180as vhs30pw-180as VHS40pw-180as VHS40pw-180-06as vhs50pw-180as vhs20pw-190as vhs30pw-190as VHS40pw-190as VHS40pw-190-06as vhs50pw-190as model vhs20 vhs30 VHS40 VHS40-06 vhs50 bracket assembly part no. note 1) silencer assembly part no. note 2) 2 series vhs20/30/40/50 conforming to osha standard pressure relief 3 port valve with locking holes (single action) www.datasheet.net/ datasheet pdf - http://www..co.kr/
m w t x y v u bracket (option) p2 (port size) 2 x p1 (port size) 2 ?i f g h e c ?10 d padlock mounting position l r s q n a b exh in out sup 3 3 j 2 x ?k aa built-in silencer (option) bb (width across flats) exh. sup. 3 1 2 exh. sup. exh. sup. 3 1 2 3 1 2 dimensions dimensions model p1 p2 a b c d e f g h i j k l m 1/8, 1/4 1/4, 3/8 1/4, 3/8, 1/2 3/4 3/4, 1 1/8 1/4 3/8 1/2 1/2 66.4 80.3 104.9 110.4 134.3 22.3 29.4 38.5 42 53 40 53 70 75 90 37.5 49 63 63 76 14 19 22 22 26 46.6 52 58 58 76 33.6 38 44 44 61 28 30 36 44 53 37.5 49 63 63 81 24 30 38 43 50 4.5 4.5 5.5 5.5 6.5 14.8 19 24 26 31 9 9 10 10 12 (mm) vhs20 vhs30 VHS40 VHS40-06 vhs50 standard specifications model built-in silencer n q r s t u v w x y aa 2.3 2.3 2.8 2.8 3.2 30 41 50 50 70 53.3 67 79 79 108 25.3 33 44 46 60 31.3 40 53 55 71 75.4 90.9 119.4 123.4 152.3 40 53 70 70 90 27 36.5 43.5 43.5 49.5 8.4 10 19 19 27.5 5.4 6.5 8.5 8.5 11 3 3 3 4 4 bb 12 14 19 22 22 vhs20 vhs30 VHS40 VHS40-06 vhs50 with bracket options specifications vhs30 VHS40/50 vhs20 3 series vhs20/30/40/50 www.datasheet.net/ datasheet pdf - http://www..co.kr/
in out spacer with bracket spacer spacer with bracket built-in silencer 3 how to order 04 a bs vhs 4 made to order x1 description body: red note) symbol semi-standard specifications nil r z note) description ? flow direction: right left psi as unit displayed on label symbol options nil b s description ? with bracket built-in silencer (exh port) symbol pressure relief 3 port valve 510 double action body size thread type nil n f rc npt g handle / bonnet material 01 02 03 04 06 10 symbol body size 2 ? ? ? ? 3 ? ? ? ? 4 ? ? 5 ? ? ? ? port size port size 1/8 1/4 3/8 1/2 3/4 1 double action 2 3 4 5 symbol a b material flame resistant pbt aluminum symbol note) vhs5510 can be connected to ac55 and ac60. a spacer or spacer with bracket is required if the valve is combined with modular f.r.l. please order it separately. pressure relief 3 port valve spacer with bracket part no. spacer part no. y200-a y300-a y400-a y500-a y600-a y200t-a y300t-a y400t-a y500t-a y600t-a applicable air preparation equipment ac20-a ac25-a, ac30-a ac40-a ac40-06-a ac50, ac55 note) , ac60 note) vhs2510 vhs3510 vhs4510 vhs4510-06 vhs5510 note) refer to photo of x1 in feature 2 for the appearance. note) only for the npt thread. under the new measurement law, products for overseas use only (si unit type for use in japan). conforming to osha standard pressure relief 3 port valve with locking holes (double action) series vhs2510 /3510 /4510 /5510 4 rohs www.datasheet.net/ datasheet pdf - http://www..co.kr/
3 (exh) 3 (exh) r t y u e w q w e r t y u q 1 (in) 2 (out) 2 (out) 1 (in) cross section of exh port built-in silencer (option) !1 !2 !3 specifications model vhs2510 vhs3510 vhs4510 vhs4510-06 vhs5510 77 g 93 g 129 g 158 g 250 g 304 g 296 g 352 g 536 g 635 g air ?5 to 60c(no freezing) 1.5 mpa 0.1 to 1.0 mpa 90 handle: red body: white fluid ambient and fluid temperature proof pressure operating pressure range handle switching angle paint color (standard) weight a (handle, bonnet: flame resistant pbt) b (handle, bonnet: aluminum) model in, out exh port size inout outexh flow-rate characteristics c(dm 3 /sbar) b cv c(dm 3 /sbar) b cv 1/8 1/4 1/4 3/8 1/4 3/8 1/2 3/4 3/4 1 2.4 3.3 6.4 8.3 7.3 10.9 14.2 18.3 23.8 31.9 0.43 0.40 0.45 0.41 0.49 0.45 0.39 0.31 0.41 0.33 0.65 0.88 1.7 2.3 2.0 3.0 3.8 5.0 6.4 8.6 2.5 3.1 6.2 7.0 8.5 11.6 13.3 17.7 21.8 23.5 0.39 0.51 0.38 0.41 0.35 0.40 0.43 0.37 0.41 0.44 0.69 0.84 1.7 1.9 2.3 3.1 3.6 4.8 5.9 6.4 vhs2510 vhs3510 vhs4510 vhs4510-06 vhs5510 flow-rate characteristics standard specifications construction vhs2510 to 5510-b vhs2510 to 5510-a 1/8 1/4 3/8 1/2 1/2 jis symbol 3 1 2 component parts description vhs2510 to 5510-a vhs2510 to 5510-b material flame resistant pbt (ul-94 standard v-0 equivalent) flame resistant pbt (ul-94 standard v-0 equivalent) adc12 adc12 adc12 pom pbt h-nbr stainless steel pom note white white red ? ? ? ? ? body bonnet handle cam ring spool spool o-ring spool spring ferrule no. 1 2 3 4 5 6 7 8 ? the vhs series cannot be disassembled. parts cannot be shipped separately. option part no. vhs20pw-180as vhs30pw-180as VHS40pw-180as VHS40pw-180-06as vhs50pw-180as vhs20pw-190as vhs30pw-190as VHS40pw-190as VHS40pw-190-06as vhs50pw-190as model bracket assembly part no. note 1) bracket assembly part no. note 2) vhs2510 vhs3510 vhs4510 vhs4510-06 vhs5510 note 1) bracket/1pc., mounting screw/2pcs. note 2) element !1, element o-ring !2, element cover !3 1pc. for each. osha standard (occupational safety and health administration department of labor) for safety control, osha rule requires energy sources for certain equipment be turned off or disconnected and that the device either be locked or labelled with a warning tag. 5 series vhs2510 /3510 /4510 /5510 www.datasheet.net/ datasheet pdf - http://www..co.kr/
vhs3510 vhs2510 m w t x y v u bracket (option) p2 (port size) 2 x p1 (port size) 2 ?i f g h e c ?10 d padlock mounting position l r s q n a + z b exh out sup 3 3 j 2 x ?k aa built-in silencer (option) bb (width across flats) in exh. sup. p u s h exh. sup. p u s h exh. sup. p u s h 3 1 2 3 1 2 3 1 2 dimensions vhs4510/5510 dimensions model p1 p2 a b c d e f g h i j k l m 1/8, 1/4 1/4, 3/8 1/4, 3/8, 1/2 3/4 3/4, 1 1/8 1/4 3/8 1/2 1/2 66.4 80.3 104.9 110.4 134.3 22.3 29.4 38.5 42 53 40 53 70 75 90 37.5 49 63 63 76 14 19 22 22 26 46.6 52 58 58 76 33.6 38 44 44 61 28 30 36 44 53 37.5 49 63 63 81 24 30 38 43 50 4.5 4.5 5.5 5.5 6.5 14.8 19 24 26 31 9 9 10 10 12 z 3.2 3.2 4.2 4.2 4.2 (mm) vhs2510 vhs3510 vhs4510 vhs4510-06 vhs5510 standard specifications model built-in silencer 2.3 2.3 2.8 2.8 3.2 30 41 50 50 70 53.3 67 79 79 108 25.3 33 44 46 60 31.3 40 53 55 71 75.4 90.9 119.4 123.4 152.3 40 53 70 70 90 27 36.5 43.5 43.5 49.5 8.4 10 19 19 27.5 5.4 6.5 8.5 8.5 11 3 3 3 4 4 n q r s t u v w x y aa bb 12 14 19 22 22 vhs2510 vhs3510 vhs4510 vhs4510-06 vhs5510 with bracket options specifications 6 series vhs2510 /3510 /4510 / 5510 conforming to osha standard pressure relief 3 port valve with locking holes (double action) www.datasheet.net/ datasheet pdf - http://www..co.kr/
precautions on design warning 1. please consult with smc in cases where the ambient environment does not permit leak - age or if fluid other than air is used. 2. do not apply negative pressure. it may result in malfunction. 3. do not supply air pressure from ports other than the 1 (p) port. the valve will malfunction when air pressure is supplied from other ports. piping warning 1. the port marked with an arrow ( ) is the 1 (p) port (in) and one on the opposite side is the 2 (a) port (out). the port at a right angle to them is the 3 (r) port (exh). be sure to confirm before connecting since erroneous connection will cause malfunction. piping warning 2. before piping is connected, the pipes should be thoroughly blown through with air (flushing) or washed to remove chips, cutting oil and oth- er debris from inside. should they remain, they could cause malfunction. 3. when connecting pipes and fittings, etc., be sure that neither chips from the pipe threads nor sealing material get inside the valve. when using sealant tape, leave 1.5 to 2 thread ridges exposed at the end of the pipe/fitting. 4. when screwing a piping component into the valve, secure the female threaded side and apply the recommended tightening torque. under tightening may result in loosening or sealing failure while over tightening may cause damage to threads and other problems. selection warning 1. in some cases, mineral oil grease used for internal parts and sealant may be carried to the output side. please contact smc if this causes any inconvenience in use. operating environment warning 1. do not use valves where there is direct contact with, or in atmospheres of, corrosive gases, chemicals, salt water, water or steam. air supply warning 1. use clean air. do not use compressed air which contains chemicals, syn- thetic oils containing organic solvents, salts or corrosive gas- es, etc., as this can cause damage or malfunction. 2. install an air dryer or after cooler on the up- stream side of the pressure release 3 port valve because air containing excessive drainage may cause malfunction. caution 1. install an air filter of 5 m or less filtration on the inlet side. 2. install a mist separator on the inlet side to re- move carbon powder from the compressor or other equipment. an excessive amount of car- bon dust ingress via the inlet may cause the valve to malfunction. refer to ?smc air preparation system? for further details on compressed air quality. installation and adjustment warning 1. confirm the symbols ?1? and ?2? before the valve is connected. the port marked ?1? is the air inlet and the port marked ?2? is the outlet. pressurization is only possible via the inlet port (1). reverse connection may cause malfunction. the port symbols and corresponding piping types are shown in the table below. caution 1. the valve must be switched to each position instantly and securely. stopping the knob between the extreme positions may cause malfunction. 2. do not remove the mounting screws from the bonnet. as this may cause malfunction. piping type inlet outlet exhaust port symbol 1 2 3 3/4 28 to 30 connection thread torque recommended tightening torque unit: nm 1/8 7 to 9 1/4 12 to 14 3/8 22 to 24 1/2 28 to 30 1 36 to 38 7 series vhs20 / 30 / 40 / 50 series vhs2510 / 3510 / 4510 / 5510 specific product precautions 1 be sure to read before handling. refer to back cover for safety instructions and "handling precautions for smc products" (m-e03-3) for 3/4/5 port solenoid valve precautions. www.datasheet.net/ datasheet pdf - http://www..co.kr/
built-in silencer (option) bronze sintered metal element caution products made of bronze may contain uneven color due to the oxidization process of the atmosphere. however, this oxidization process occurs in the limited range of less than 1m of thickness and is so thin as to not affect the product characteristics. the uneven color occurs depending on the storage duration before utilization (stock as a product, stock in customer) ? if this is a problem, please contact smc so that smc can pre-treat them with nickel plating. operating environment warning 2. do not use in an explosive atmosphere. 3. do not use in locations subject to vibration or impact. confirm the specifications for each series. 4. a protective cover should be used to shield valves from direct sunlight. 5. shield valves from radiated heat generated by nearby heat sources. 6. employ suitable protective measures in loca- tions where there is contact with water drop- lets, oil, or welding spatter. 7. install a silencer into port 3 (r) to prevent the ingress of dust if there is a lot of dust in the atmosphere. if dust enters the valve via port 3 (r) , it may cause air leak- age. maintenance warning 1. perform maintenance procedures as shown in the instruction manual. if handled improperly, malfunction or damage of machinery or equipment may occur. 2. do not disassemble the product. improper handling will cause malfunction or breakage of the machinery or equipment. 3. when equipment is to be removed, first con- firm that measures are in place to prevent dropping of driven objects and run-away of equipment, etc. then cut the supply air pres- sure and electric power, and exhaust all com- pressed air from the system using its residu- al pressure release function. when the equipment is to be started again after remounting or replacement, first confirm that measures are in place to prevent lurching of actuators and then confirm that equipment operates normally. caution 1. once a lubricant is introduced, be sure to con- tinue lubrication. if it is discontinued, malfunction may result due to loss of the initial lubricant. apply class 1 turbine oil (iso vg32) as a lu- bricant. use of other lubricants may cause malfunction. be sure to read before handling. refer to back cover for safety instructions and "handling precautions for smc products" (m-e03-3) for 3/4/5 port solenoid valve precautions. 8 series vhs20 / 30 / 40 / 50 series vhs2510 / 3510 / 4510 / 5510 specific product precautions 2 www.datasheet.net/ datasheet pdf - http://www..co.kr/
1. the compatibility of the product is the responsibility of the person who designs the equipment or decides its specifications. since the product specified here is used under various operating conditions, its compatibility with specific equipment must be decided by the person who designs the equipment or decides its specifications based on necessary analysis and test results. the expected performance and safety assurance of the equipment will be the responsibility of the person who has determined its compatibility with the product. this person should also continuously review all specifications of the product referring to its latest catalog information, with a view to giving due consideration to any possibility of equipment failure when configuring the equipment. 2. only personnel with appropriate training should operate machinery and equipment. the product specified here may become unsafe if handled incorrectly. the assembly, operation and maintenance of machines or equipment including our products must be performed by an operator who is appropriately trained and experienced. 3. do not service or attempt to remove product and machinery/ equipment until safety is confirmed. 1. the inspection and maintenance of machinery/equipment should only be performed after measures to prevent falling or runaway of the driven objects have been confirmed. 2. when the product is to be removed, confirm that the safety measures as mentioned above are implemented and the power from any appropriate source is cut, and read and understand the specific product precautions of all relevant products carefully. 3. before machinery/equipment is restarted, take measures to prevent unexpected operation and malfunction. 4. contact smc beforehand and take special consideration of safety measures if the product is to be used in any of the following conditions. 1. conditions and environments outside of the given specifications, or use outdoors or in a place exposed to direct sunlight. 2. installation on equipment in conjunction with atomic energy, railways, air navigation, space, shipping, vehicles, military, medical treatment, combustion and recreation, or equipment in contact with food and beverages, emergency stop circuits, clutch and brake circuits in press applications, safety equipment or other applications unsuitable for the standard specifications described in the product catalog. 3. an application which could have negative effects on people, property, or animals requiring special safety analysis. 4. use in an interlock circuit, which requires the provision of double interlock for possible failure by using a mechanical protective function, and periodical checks to confirm proper operation. warning limited warranty and disclaimer/ compliance requirements the product used is subject to the following ?limited warranty and disclaimer? and ?compliance requirements?. read and accept them before using the product. 1. the product is provided for use in manufacturing industries. the product herein described is basically provided for peaceful use in manufacturing industries. if considering using the product in other industries, consult smc beforehand and exchange specifications or a contract if necessary. if anything is unclear, contact your nearest sales branch. caution limited warranty and disclaimer 1. the warranty period of the product is 1 year in service or 1.5 years after the product is delivered, whichever is first. ? 2) also, the product may have specified durability, running distance or replacement parts. please consult your nearest sales branch. 2. for any failure or damage reported within the warranty period which is clearly our responsibility, a replacement product or necessary parts will be provided. this limited warranty applies only to our product independently, and not to any other damage incurred due to the failure of the product. 3. prior to using smc products, please read and understand the warranty terms and disclaimers noted in the specified catalog for the particular products. ? 2) vacuum pads are excluded from this 1 year warranty. a vacuum pad is a consumable part, so it is warranted for a year after it is delivered. also, even within the warranty period, the wear of a product due to the use of the vacuum pad or failure due to the deterioration of rubber material are not covered by the limited warranty. compliance requirements 1. the use of smc products with production equipment for the manufacture of weapons of mass destruction (wmd) or any other weapon is strictly prohibited. 2. the exports of smc products or technology from one country to another are governed by the relevant security laws and regulations of the countries involved in the transaction. prior to the shipment of a smc product to another country, assure that all local rules governing that export are known and followed. these safety instructions are intended to prevent hazardous situations and/or equipment damage. these instructions indicate the level of potential hazard with the labels of ?caution,? ?warning? or ?danger. ? they are all important notes for safety and must be followed in addition to international standards (iso/iec) ? 1) , and other safety regulations. ? 1) iso 4414: pneumatic fluid power ? general rules relating to systems. iso 4413: hydraulic fluid power ? general rules relating to systems. iec 60204-1: safety of machinery ? electrical equipment of machines. (part 1: general requirements) iso 10218-1: manipulating industrial robots ? safety. etc. caution indicates a hazard with a low level of risk which, if not avoided, could result in minor or moderate injury. warning indicates a hazard with a medium level of risk which, if not avoided, could result in death or serious injury. ca ut ion: warn ing : dang er : danger indicates a hazard with a high level of risk which, if not avoided, will result in death or serious injury. safety instructions safety instructions be sure to read ?handling precautions for smc products? (m-e03-3) before using. akihabara udx 15f, 4-14-1, sotokanda, chiyoda-ku, tokyo 101-0021, japan phone: 03-5207-8249 fax: 03-5298-5362 http://www.smcworld.com ? 2012 smc corporation all rights reserved specifications are subject to change without prior notice and any obligation on the part of the manufacturer. 1st printing qx printing qx 8150sz printed in japan. d-g www.datasheet.net/ datasheet pdf - http://www..co.kr/

▲Up To Search▲

Price & Availability of VHS40

	To Download VHS40 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .